Publications nationales

01

Mohamed-Ouejdi Belarbi; Tati, Abdelouahab; Khechai, Abdelhak, Effect of Thickness Stretching on the Natural Frequencies of Laminate-Faced Sandwich Plates Using a New Layerwise Model,. Journal of Building Materials and Structures; Laghouat Vol. 6, N° 2,  (2019): 88-96. DOI:10.5281/zenodo.3352310

02

Khoudiri, S.;Benchabane, F.; Yahia, K.: ''Nonlinear Control of a GridConnectedHybridEnergeticSystems (HES) based on Photovoltaic-Fuel CellsDistributed Power GenerationSystems''; Journal of Applied Engineering Science &Technology, Vol. 4, No. 1, pp. 29-36, May, 2018.

03

F. BAIRA, M. ZIDANI S. MESSAOUDI, L. AISSANI, T.BAUDIN, Influence du traitement de recuitsur la microstructure et les propriétés mécaniques et électriques d'un fil de cuivre tréfiléindustriellement, Proceedings 4Th International Conference on Energy, Materials, Applied Energeticsand pollution (ICEMAER'18), Constantine, Algéria ,29th and 30th Vol.3, pp. 1408-1416, April (2018).

04

T.DJIMAOUI, M.ZIDANI, A.KISRANE BOUZIDI, M.C. NEBBAR L.MEBARKI,T.ABID. Etude decomportement au tréfilage des fils en acier doux destinés pour des applications industriels . Revue science des matériaux, Laboratoire LARHYSS (N°09), Vol.9,n:1, p. 36-43 (2017) http://revues.univbiskra.dz/index.php/sdm/article/view/2164.

05

Meghezzi-Larafi, I., & Tati, A. (2016). The effective length estimation of columns in semi-rigid jointed braced frames. J. Appl. Eng. Sci. Technol, 2(2), 91-97.

06

Mohamed-Ouejdi, B., Abdelouahab, T., Abdelhak, K., & Houdayfa, O. (2016). A new 4-node quadrilateral element based on layerwise approach for free vibration analysis of laminate-faced sandwich plates. Journal of Applied Engineering Science & Technology, 2(1), 1-7.

Publications internationales

01

Belounar, A., Boussem, F. & Tati, A. A Novel C₀ Strain-Based Finite Element for Free Vibration and Buckling Analyses of Functionally Graded Plates. J. Vib. Eng. Technol. (2022). https://doi.org/10.1007/s42417-022-00577-x

02

Djahara H., Meftah K., Sedira L. & Ayadi A. New two 20-node high-order finite elements based on the SFR concept for analyzing 3D elasticity problems. Journal of Solid Mechanics. 2022; 14(2): 252-271. DOI: 10.22034/JSM.2021.1942740.1718.

http://jsm.iau-arak.ac.ir/article_688588.html

03

Belounar, A., Boussem, F., Houhou, M.N. et al. Strain-based finite element formulation for the analysis of functionally graded plates. Arch Appl Mech (2022). https://doi.org/10.1007/s00419-022-02160-y

04

M.F. BENLAMNOUAR, N. BENSAID, R. BADJI, T. SAADI, M.IDDIR, M. ZIDANI,
M.A. SOUALIL, Study of the influence of wire metals on dissimilar welds, IOP Conf. Ser.: Mater. Sci. Eng (Springer: Thomson Reuters /Scopus -Elsevier) Vol. 1233 012008 (2022)

05

N. BENSAID, M.F. BENLAMNOUAR, R. BADJI, T. SAADI, M. ZIDANI, M. GOUSMINE ,Microstructural and mechanical characterization of HSLAX70 Welded joints using eddy current testing ECT), IOP Conf. Ser.: Mater. Sci. Eng (Springer: Thomson Reuters /Scopus -Elsevier) Vol. 1233 012012 (2022) (2022)

06

T. ABID, M.C. NEBBAR, M. ZIDANI, M. REDOUANE, T.BAUDIN , Effect of deformation rate onmicrostructure and drawability of medium carbon steel wires , Metal Science and Heat Treatment(Springer: Thomson Reuters /Scopus -Elsevier) ( accepted 2022)

07

Meftah K., Sedira L. & Ayadi A., A six-node prismatic solid finite element for geometric nonlinear problems in elasticity. Mathematics and Computers in Simulation. 2021; 182: 143-164. DOI: 10.1016/j.matcom.2020.10.021.

https://doi.org/10.1016/j.matcom.2020.10.021

08

Mahmoudi, A.; Jlassi, I.; Cardoso, A. J. M.; Yahia, K.; Sahraoui, M.: ''Inter-Turn Short-Circuit FaultsDiagnosis in Synchronous Reluctance Machines, Using the Luenberger State Observer and Current’s Second-OrderHarmonic''; IEEE Transactions on IndustrialElectronics, Vol. , No. Earlyaccess, pp. ,September, 2021.

09

Amira Sadgui & Abdelouahab Tati (2021) A novel trigonometric shear deformation theory for the buckling and free vibration analysis of functionally graded plates, Mechanics of Advanced Materials and Structures, DOI: 10.1080/15376494.2021.1983679

10

Tati, A. Finite element analysis of thermal and mechanical buckling behavior of functionally graded plates. Arch Appl Mech 91, 4571–4587 (2021). https://doi.org/10.1007/s00419-021-02025-w

11

Tati, A. A five unknowns high order shear deformation finite element model for functionally graded plates bending behavior analysis. J Braz. Soc. Mech. Sci. Eng. 43, 45 (2021). https://doi.org/10.1007/s40430-020-02736-1

12

Belarbi, M-O, Zenkour, AM, Tati, A, Salami, SJ, Khechai, A, Houari, M-S-A. An efficient eight-node quadrilateral element for free vibration analysis of multilayer sandwich plates. Int J Numer Methods Eng. 2021; 122: 2360– 2387. https://doi.org/10.1002/nme.6624

13

M.C. NEBBAR, M. ZIDANI, S.MESSAOUDI, T. ABID, A.KISRANE-BOUZIDI, T.BAUDIN , Wiredrawing effect on microstructural and textural evolution in medium carbon steel wire , Defect and Diffusion Forum: (TTP: indexed by: Scopus -Elsevier) Vol. 406, pp. 505-510 (2021)

14

Souhia Bouadjadja, Abdelouahab Tati & Belhi Guerira (2022) Analytical and experimental investigations on large deflection analysis of composite cantilever beams, Mechanics of Advanced Materials and Structures, 29:1, 118-126, DOI: 10.1080/15376494.2020.1751901

15

Meftah K. & Sedira L. A six-node prismatic solid finite element for laminated composites. Composites: Mechanics, Computations, Applications, An International Journal. 2020; 11(3): 267-285. DOI: 10.1615/CompMechComputApplIntJ.2020032289.

https://doi.org/10.1615/CompMechComputApplIntJ.2020032289

16

Ayadi A., Meftah K. & Sedira L. Elastoplastic analysis of plane structures using improved membrane finite element with rotational DOFs. Frattura ed Intergità Strutturale. 2020; 14 (52): 148-162. DOI: 10.3221/IGF-ESIS.52.13.

https://doi.org/10.3221/IGF-ESIS.52.13

17

A.KISRANE-BOUZIDI, M. ZIDANI, M.C. NEBBAR. T. ABID, A.L. HELBERT, F. BRISSET, T.BAUDIN, Mechanical Properties and Texture Evolution of High-Carbon Steel Wires during: Strand Manufacturing, International Journal JERA (TTP indexed by: Thomson Reuters /Scopus - Elsevier) Vol.49, pp 130-138 (2020).

18

S. MOKHTARA, M. ZIDANI, M. M. ALIM. S. MECHACHTI, Plasma Nitriding of Hard ChromiumElectroplated Low Alloy AISI 4340 Steel in Pure Nitrogen Gas Atmosphere, International, Journal JNanoR (TTP : indexed by: Thomson Reuters / Scopus -Elsevier) Vol. 65, pp.135-144 (2020).

19

Tati, A., Bouadjadja, S. & Bada, Y. Free Vibration of Thermally Stressed Angle-Ply Laminated Composite Using First-Order Shear Deformation Theory Model with Assumed Natural Shear Strain. J. Inst. Eng. India Ser. C 100, 937–947 (2019). https://doi.org/10.1007/s40032-018-0484-0

20

Khechai, A., Tati, A., Belarbi, M.O. et al. Numerical Analysis of Stress Concentration in Isotropic and Laminated Plates with Inclined Elliptical Holes. J. Inst. Eng. India Ser. C 100, 511–522 (2019). https://doi.org/10.1007/s40032-018-0448-4

21

Souhia Bouadjadja, et al., Nonlinear Bending Analysis of Composite Cantilever Beams. Australian Journal of Basic and Applied Sciences, 13(7): 28-34. DOI: 10.22587/ajbas.2019.13.7.5

22

Meftah K. & Sedira L. A four-node tetrahedral finite element based on Space Fiber Rotation concept. Acta Universitatis Sapientiae, Electrical and Mechanical Engineering. 2019; 11: 67-78. DOI: 10.2478/auseme-2019-0006.

https://doi.org/10.2478/auseme-2019-0006

23

Ayadi A., Meftah K., Sedira L. & Djahara H. An eight-node hexahedral finite element with Rtational DOFs for elastoplastic applications. Acta Universitatis Sapientiae, Electrical and Mechanical Engineering. 2019; 11: 54-66. DOI: 10.2478/auseme-2019-0005. https://doi.org/10.2478/auseme-2019-0005

24

Guerbaai S., Touiker M., Meftah K. & Omara A. Numerical study of fluid flow through a confined porous square cylinder. Acta Universitatis Sapientiae, Electrical and Mechanical Engineering. 2019; 11: 87-98. DOI: 10.2478/auseme-2019-0008. https://doi.org/10.2478/auseme-2019-0008

25

Meftah K. & Sedira L. A nonlinear elasto-plastic analysis of Reissner-Mindlin plates by finite element method. Frattura ed Intergità Strutturale. 2019; 13 (50): 281-290. DOI: 10.3221/IGF-ESIS.50.23. https://doi.org/10.3221/IGF-ESIS.50.23

26

Djaballah S., Meftah K., Khelil K., Tedjini M. & Sedira L. Detection and diagnosis of fault bearing using wavelet packet transform and neural network. Frattura ed Intergità Strutturale. 2019; 13 (49): 291-301. DOI: 10.3221/IGF-ESIS.49.29.

https://doi.org/10.3221/IGF-ESIS.49.29

27

MC. NEBBAR, M. ZIDANI, T. DJIMAOUI, T. ABID, H.FARH, T. ZIAR,, A.L. HELBERT,F. BRISSET, T.BAUDIN , Microstructural evolutions and mechanical properties of drawn medium carbon steel wire , International Journal JERA (TTP indexed by: Thomson Reuters /Scopus -Elsevier) Vol.41, pp.01-07 (2019).

28

F. KHAMOULI, M. ZIDANI, K. DIGHECHE, A. SAOUDI and L.ATOUI, Influence of CellulosicFluxes on the Chemical Composition, Microstructure, Inclusions and Micro-Hardness of SMAWMulti-Pass Welds of X42 Steel, Solid State Phenomena: (TTP indexed by: Scopus -Elsevier), Vol.297, pp.62-70 (2019).

29

F. KHAMOULI, M. ZIDANI, K. DIGHECHE, A. SAOUDI, H.MOUSSI and L.ATOUI, ChemicalCharacterization of the Crystalline Phases in Agglomerated Fluxes and Slags for Shielded Metal ArcWelding (SMAW), Solid State Phenomena: (TTP indexed by: Scopus Elsevier), Vol.297, pp.151-164 (2019)

30

M. BAYARASSOU, F. BAIRA, M. ZIDANI, T. DJIMAOUI and K. FEDAOUI, Study of the effect of aging on precipitation in wire drawn and annealed aluminum alloy (AGS) Defect and Diffusion Forum (TTP indexed by: Scopus -Elsevier), Vol.397, pp.76-80 (2019)

31

M.ZIDANI, M.C.NEBBAR, T.DJIMAOUI, S.MESSAOUDI, H.FARH, A-L. HELBERT, F.
BRISSET and T. BAUDIN, Mechanical behavior and texture evolution study of medium carbon steelwires during industrial wire-drawing process; Proceedings METAL 2019, Brno, Czech Republic, EU, (indexed by: Thomson Reuters /Scopus -Elsevier) pp. 344-348(2019).

32

S.MESSAOUDI, T.DJIMAOUI, M.ZIDANI, M.C.NEBBAR, M.H.MATHON, A-L. HELBERT,F. BRISSET and T. BAUDIN, Texture analysis of mild steel soldering rod, Proceedings METAL 2019, Brno, Czech Republic, EU, (indexed by: Thomson Reuters /Scopus -Elsevier) pp. 338-343 (2019).

33

A. Khechai, A. Tati, B. Guerira, A. Guettala, P.M. Mohite,Strength degradation and stress analysis of composite plates with circular, square and rectangular notches using digital image correlation,Composite Structures,Volume 185,2018,Pages 699-715,

34

Khechai, A., Tati, A. & Guettala, A. Numerical Study of the Effect of Presence of Geometric Singularities on the Mechanical Behavior of Laminated Plates. J. Inst. Eng. India Ser. C 99, 717–728 (2018). https://doi.org/10.1007/s40032-017-0367-9

35

Khechai, A., Tati, A., Guettala, A. et al. A general solution for stress resultants around a circular cutout in laminate plates under different in-plane loadings: analytical and experimental investigations. Arch Appl Mech 88, 1187–1208 (2018). https://doi.org/10.1007/s00419-018-1366-x

36

Benchabane, F.;Guettaf, A.; Yahia, K.; Sahraoui, M.: ''Experimental Investigation on Induction Motors Inter-Turns Short-Circuit and Broken Rotor Bars FaultsDiagnosisthrough the DiscreteWaveletTransform''; 3D Printing and Additive Manufacturing, Vol. 135, No. 2, pp. 187-194, April, 2018.

37

M.ZIDANI, L.BESSAIS, H.FARH, S.MESSAOUDI, M.D.DJIMAOUI,
D.TOUFIK, D.MIROUD, M. H. MATHON, A.L. HELBERT, M. K. LOUDJANI, T. BAUDIN, Microstructural evolution as well as mechanical and electrical properties of AA 6101 wire duringrecrystallization annealing treatment; Proceedings METAL 2017, Brno, Czech Republic, EU, (indexedby: Thomson Reuters /Scopus -Elsevier) ) pp. 1958-1963 (2018).

38

S. MESSAOUDI, M.ZIDANI, L. BESSAIS, T. DJIMAOUI, M. H. MATHON, A.L. HELBERT, F.BRISSET and T. BAUDIN,, Effect of heat treatment on the properties of aluminum alloy ags 6101after wire drawing,; Proceedings METAL 2017 ,,Brno, Czech Republic, EU, (indexed by: ThomsonReuters /Scopus -Elsevier) pp. 390-395 (2018)

39

T.DJIMAOUI, M.ZIDANI, M.C. NEBBAR, T.ABID, H. Farh, A.L. Helbert, F. Brisset and T.Baudin,Study of microstructural and mechanical behavior of mild steel wires
cold drawn at TREFISOUD, International Journal JERA (TTP indexed by: Thomson Reuters/Scopus-Elsevier ) Vol. 36, pp. 53-59 (2018)

40

M.BAYARASSOU, M.ZIDANI, , H. FARH, Microstructural Evolution and Mechanical Propertiesduring Homogenization and Ageing Treatment of Al-Mg-Si Alloy Wire Cold Drawn, International Journal JERA (TTP indexed by: Thomson Reuters /Scopus -Elsevier), Vol. 36, pp. 60-68 (2018).

41

F. BAIRA, M. ZIDANI, T.BAUDIN, Etude de la texture et les propriétés mécaniques et électriquesdes fils de cuivre tréfilés et recuits, Proceedings of Engineering and Technology – PET, GEEE-2018, Sousse,Tunisia,Vol.39, pp.1-6 (PET Journal indexed by: Scopus -Elsevier) (2018).

42

L.MIBARKI, M. ZIDANI, A. BOUKHOBZA, S.MECHACHTI and K. FEDAOUI Effect of theproportion of tungsten element on the mechanical and structural properties of (Fe3C - W - Ni) sinteredalloy, Diffusion Foundation: TTP, Vol. 18, pp.35-40 (2018).

43

F. KHAMOULI, M. ZIDANI, K. DIGHECHE, A. SAOUDI AND L.ATOUI, Effect of E6010 andE8018-G Fluxes utilization on SMAW multi-pass welded steel, Diffusion Foundation: TTP,Vol.18,pp. 55-64 (2018).

44

M.BAYARASSOU, M.ZIDANI, H. FARH, Influence of aging treatments on the structural and mechanical properties of AGS Alloy wire cold drawn, Diffusion Foundation: TTP Vol.18, pp.73-78 (2018).

45

M.ZIDANI, L.BESSAIS, H.FARH, S.MESSAOUDI, H.FARH, F.BAIRA, M.H.MATHON,
A-L. HELBERT, F. BRISSET and T. BAUDIN, Multi-scale analysis by EBSD, X-ray diffraction andneutron diffraction of microstructure and texture of Al-Mg-Si aluminum
alloy wires drawn and annealed; Proceedings METAL 2018, Brno, Czech Republic, EU,(indexed by: Thomson Reuters /Scopus -Elsevier) ) pp. 310-315 (2018).

46

S.MESSAOUDI, M.ZIDANI, M.D.HADD, M.H.MATHON, A-L. HELBERT, F. BRISSET andT. BAUDIN, Study of the Precipitation in AGS 6101 Aluminum Alloy Wires at Room Temperatureand the Effect of Deformation ; Proceedings METAL 2018, Brno, Czech Republic, EU, (indexed by:Thomson Reuters /Scopus -Elsevier) ) pp. 304-309 (2018).

47

H. BELGHIT, H. FARH, T. ZIAR, M. ZIDANI, M. GUEMINI, Study of mechanical properties and precipitation reactions in low copper containing Al-Mg-Si alloy, Archives of metallurgy and materials (indexed by: Thomson Reuters /Scopus -Elsevier ) Vol.63, n: 4, pp.1643-1648 (2018).

48

BELARBI, M. O., TATI, A., OUNIS, H., & KHECHAI, A. (2017). ON THE FREE VIBRATION ANALYSIS OF LAMINATED COMPOSITE AND SANDWICH PLATES: A LAYERWISE FINITE ELEMENT FORMULATION. Latin American Journal of Solids and Structures, 14(12), 2265-2290.

50

K.DJEMMAL , H.FARH , R.GUEMINI , M.ZIDANI and F.SERRADJ, Effect of Natural and Artificial Aging on the Mechanical Properties of Two Al-Mg-Si Alloys, International Journal of JERA(TTP indexed by: Thomson Reuters /Scopus -Elsevier) Vol. 28, pp. 1-7, (2017) DOI:10.4028/www.scientific.net/JERA.28.1

51

A.SAOUDI, F.KHAMOULI, L.ATOUI, M.ZIDANI and H.FARH, Statistical Distribution Analysis of Mechanical Properties of a Welded Pipeline steel API X70 and Correlation between Hardness andother Mechanical Characteristics, International Journal of JERA (TTP indexed by: Thomson Reuters/Scopus -Elsevier) Vol. 30, pp. 49-64, (2017)

52

F.BAIRA, M.ZIDANI, H. FARH, S. MESSAOUDI, T. ZIAR, A.L. HELBERT and T.BAUDIN,Deformation and Recrystallised texture evolution and followes the mechanical and electrical propertiesof drawn and annealed copper wires, International Journal JERA (TTP indexed by: Thomson Reuters/Scopus -Elsevier) Vol. 31, pp. 20-28, (2017)

53

L.MEBARKI, M.ZIDANI, S.MECHACHETI, H. FARH, and D.MIROUD, Effect Of Nickel
Addition Study On The Mechanical Properties Of The (Fe3c-Ni) Alloy Obtained By Solid PhaseCompaction And Sintering, International Journal JERA (TTP indexed by: Thomson Reuters /Scopus -Elsevier) ) Vol. 32, pp. 18-24 (2017).

54

S. MECHACHTI, O. BENCHIHEUB, A. ABIDI, N. GHERRAF3, M. ZIDANI AND H. FARH,Property evaluation of Nitrided Layers of Porous Sintered Iron, International Journal JERA (TTPindexed by: Thomson Reuters /Scopus -Elsevier) ) Vol. 32, pp. 11-17 (2017).

55

Belarbi, M. O., Tati, A., Ounis, H., & Benchabane, A. (2016). Development of a 2D isoparametric finite element model based on the layerwise approach for the bending analysis of sandwich plates. Structural Engineering and Mechanics, 57(3), 473-506.

56

Belkaid, K., Tati, A., & Boumaraf, R. (2016). A Simple Finite Element with Five Degrees of Freedom Based on Reddy's Third-Order Shear Deformation Theory. Mechanics of Composite Materials, 52(2), 257-270.

57

Belarbi, M. O., & Tati, A. (2016). Bending Analysis of Composite Sandwich Plates with Laminated Face Sheets: New Finite Element Formulation. Journal of Solid Mechanics Vol, 8(2), 280-299.

58

Meftah K., Zouari W., Sedira L. & Ayad R. Geometric non-linear hexahedral elements with rotational DOFs. Computational Mechanics. 2016; 57:37–53. DOI 10.1007/s00466-015-1220-8. http://link.springer.com/article/10.1007/s00466-015-1220-8

59

Sedira L., Hammadi F., Ayad R., Meftah K. & Hecini M. Discrete-Mindlin finite element for nonlinear geometrical analysis of shell structures. Computational and Applied Mathematics. 2016; 35: 951–975. DOI 10.1007/s40314-015-0279-3.

http://link.springer.com/article/10.1007/s40314-015-0279-3

60

Yahia, K.; Sahraoui, M.; Cardoso, A. J. M.; Ghoggal, A.: ''The Use of a ModifiedProny'sMethod to Detect the Airgap-Eccentricity Occurrence in Induction Motors''; IEEE Transactions on Industry Applications, Vol. 52, No. 5, pp. 3869 - 387, September / October, 2016.

61

Sahraoui, M.; Cardoso, A. J. M.; Yahia, K.; Ghoggal, A.: ''The Use of the ModifiedProny’sMethod for Rotor Speed Estimation in Squirrel Cage Induction Motors''; IEEE Transactions on Industry Applications, Vol. 52, No. 3, pp. 2194-2202, May / June, 2016.

62

Belarbi, M. O., & Tati, A. (2015). A new C0 finite element model for the analysis of sandwich plates using combined theories. Int. J. Structural Engineering, 6(3).

63

Bouzgou, A. A., Khechai, A., & Tati, A. (2015). Stress concentration and deflection in isotropic and orthotropic plates with opening. Finite element study. Revue des composites et des matériaux avancés, 25(3-4), pp-385.

64

Belkaid, Khmissi; Tati, Abdelouahab, Analysis of laminated composite plates bending using a new simple finite element based on Reddy's third order theory, Revue des Composites et des Matériaux Avancés . 2015, Vol. 25 Issue 1, p89-106. 18p.

65

Meftah K., Sedira L., Zouari W., Ayad R. & Hecini M. A multilayered 3D hexahedral finite element with rotational DOFs. European Journal of Computational Mechanics. 2015; 24: 107–128. DOI: 10.1080/17797179.2015.1089462.

http://www.tandfonline.com/doi/abs/10.1080/17797179.2015.1089462

66

Ounis, H., Tati, A. & Benchabane, A. Thermal buckling behavior of laminated composite plates: a finite-element study. Front. Mech. Eng. 9, 41–49 (2014). https://doi.org/10.1007/s11465-014-0284-z

67

Khechai, A., Tati, A. & Guettala, A. Finite element analysis of stress concentrations and failure criteria in composite plates with circular holes. Front. Mech. Eng. 9, 281–294 (2014). https://doi.org/10.1007/s11465-014-0307-9

68

Zouari W., Assarar M., Meftah K. & Ayad R. Free vibration analysis of structures with elastic and piezoelectric behaviors using specific hexahedral elements with rotational DOFs. Acta Mechanica. 2014; 226: 1737–1756. DOI: 10.1007/s00707-014-1274-2. http://dx.doi.org/10.1007/s00707-014-1274-2

69

Matos, D. M. B.;Estima, J. O.; Yahia, K.; Cardoso, A. J. M.: ''Modling and Implementation of MTPA Control Strategy for SynRM Variable Speed Drives''; International Review of Electrical Engineering, Vol. 9, No. 6, pp. 1103-1110, November / December, 2014.

70

Yahia, K.; Cardoso, A. J. M.; Ghoggal, A.; Zouzou, S. E.: ''Induction Motors Broken Rotor Bars DiagnosisThrough the DiscreteWaveletTransform of the InstantaneousReactive Power Signal under Time-varyingLoad Conditions''; Electric Power Components and Systems, Vol. 42, No. 7, pp. 682-692, April, 2014.

71

Yahia, K.; Cardoso, A. J. M.; Ghoggal, A.; Zouzou, S. E.: ''Induction Motors Airgap-EccentricityDetectionThrough the DiscreteWaveletTransform of the Apparent Power Signal Under Non-Stationary Operating Conditions''; ISA Transactions, Vol. 53, No. 2, pp. 603–611, March, 2014.

72

Ayad R., Zouari W., Meftah K., Ben Zineb T. & Benjeddou A. Enrichment of Linear Hexahedral Finite Elements using Rotations of a Virtual Space Fiber. International Journal for Numerical Methods in Engineering. 2013; 95:46–70. DOI: 10.1002/nme.4500. http://dx.doi.org/10.1002/nme.4500

73

Zouzou, S. E.;Sahraoui, M.; Yahia, K.: ''Induction motorsbroken rotor bars detectionusing MCSA and neural network: experimentalresearch''; International Journal of System Assurance Engineering and Management, Vol. 2, No. 4, pp. 173-181, June, 2013.

74

Meftah K., Ayad R. & Hecini M. A new 3D 6-node solid finite element based upon the “Space Fibre Rotation” concept. European Journal of Computational Mechanics. 2012; 22:1–29. DOI: 10.1080/17797179.2012.721502.

http://dx.doi.org/10.1080/17797179.2012.721502

75

Ghomari T., Meftah K., Ayad R. & Talbi N. A space fiber as added value in finite element modelling for optimal analysis of problems involving contact. European Journal of Computational Mechanics. 2012; 21:141–57. DOI: 10.1080/17797179.2012.702 435. http://dx.doi.org/10.1080/17797179.2012.702435

76

Yahia, K.; Cardoso, A. J. M.; Zouzou, S. E.; Guedidi, S.: ''Broken Rotor Bars Diagnosis in an Induction Motor Fed from a FrequencyConverter: ExperimentalResearch''; International Journal of System Assurance Engineering and Management, Vol. 3, No. 1, pp. 40-46, March, 2012.

Communications nationales

01

Traka F., Brima A. & Meftah K. Etude dynamique de l’écoulement laminaire dans élargissement brusque. The 1 st National Virtual Conference on Chemical Process and Environmental Engineering, NVCCPEE 2021, Biskra, Algeria, 15 December 2021.

02

Ayadi A., Meftah K., Sedira L. & Djahara H. Analyse non-linéaire du comportement élastoplastique des structures membranaires à l’aide de la méthode des éléments finis. Journée de Métallurgie, Biskra, Algeria, 10 November 2019. http://www.univ-biskra.dz/index.php/fr/

03

Chouarfia S., Sedira L. Meftah K., Kaddouri W. & Kanit T. Apport da la collocation par points dans l’homogénisation micromécanique. Students Symposium on Engineering Application of Mechanics, SSENAM’4, Bechar, Algeria, 18–19 December 2018. https://www.univ-chlef.dz

04

Djahara H., Meftah K. & Sedira L. A new 20-node high-order finite element based on the SFR concept for analyzing 3D elasticity problems. Students Symposium on Engineering Application of Mechanics, SSENAM’3, Mascara, Algeria, 02–03 Mai 2018.

www.univ-mascara.dz/fst/images/ProgrammeSSENAM3

05

Mahmoudi, A.; Yahia, K.; Cardoso, A. J. M.: ''Wind Turbine System UsingSynchronous Reluctance Generator Self-Excited in Stand Alone Mode''; ConferênciaCientífica e TecnológicaemEngenharia, Batna, Algeria, pp. , June, 2018.

06

Communications  internationales

01

Djaballah S., Meftah K., Daho S. & Belghennou O. Study of effects of rotational speed and diameter of the defect bearing using time-domain features. 1st International Symposium on Industrial Engineering, Maintenance and Safety, IEMS’22, Oran, Algeria, 05 – 06 March 2022.

02

Zeghichi S., Meftah K., Djahara H. & Sedira L. 3D Numerical modeling of piezoelectric composites structures using finite elements method. 1^st International Vision Conference on Materials Science and Engineering, ICMSE2021, Khenchela, Algeria, 17 – 18 November 2021.

03

Zeghichi S., Meftah K., Djahara H. & Sedira L. 3D Numerical modeling of polymer piezoelectric composites structures using finite elements method. Polymer and Mediterranean Fiber International Conference, PMFIC’2021, Béjaia, Algeria, 29 – 30 September 2021.

04

Djaballah S., Meftah K. & Daho S. Feature selection by using genetic algorithms for improving classification accuracy of bearing faults. Séminaire International sur l’Industrie et la Technologie, SIIT2021, Oran, Algeria, 12 – 13 Mars 2021. https://www.aneau.org/ajeau/

05

Guerbaai S., Touiker M., Meftah K. & Omara A. Etude du transfert thermique par convection mixte d’un cylindre carré et poreux. The First International Conference on Materials, Energy & Environment, MEE’2020, El-oued, Algeria, 20 – 21 January 2020. https://mee2020.sciencesconf.org/

06

Guerbaai S., Touiker M., Meftah K. & Omara A. Effect of favorable buoyancy on heat transfer and fluid flow of nanofluids around a square cylinder. The 5th International Conference on maintenance and industrial safety, CIMSI’2019, Skikda, Algeria, 18 – 19 November 2019. http://ftech.univ-skikda.dz/index.php/fr/

07

Djahara H., Meftah K., Sedira L. & Ayadi A. New conforming and non-conforming elements for analyzing 3D elasticity problems. Vth International Conference on Energy, Materials, Applied Energetic and Pollution, ICEMAEP’19, Constantine, Algeria, 22–24 October 2019. https://www.umc.edu.dz/index.php/fr/

08

Tedjini M., Sedira L., Guerira B. & Meftah K. Mechanical characterization and long term prediction of extruded polyamide PA6 behaviour. Vth International Conference on Energy, Materials, Applied Energetic and Pollution, ICEMAEP’19, Constantine, Algeria, 22–24 October 2019. https://www.umc.edu.dz/index. php/fr/

09

Chouarfia S., Sedira L. Meftah K., Kaddouri W. & Kanit T. Evaluation de la performance de la méthode éléments multi-phases dans l’élasticité de composite a base de fibres de palmier dattier. Vth International Conference on Energy, Materials, Applied Energetic and Pollution, ICEMAEP’19, Constantine, Algeria, 22–24 October 2019. https://www.umc.edu.dz/index.php/fr/

10

Djaballah S., Meftah K., Tedjini M. & Beggat F. Selection of the best wavelet for diagnostic of fault bearing using neural network. International Symposium on Technology & Sustainable Industry Development, ISTSID'2019, Eloued, Algeria, 24 – 26 February 2019. https://www.univ-eloued.dz/index.php/26-c-universite/c-forums/8145-istsid2019

11

Tedjini M., Sedira L., Guerira B. & Meftah K. Selection of a signal-processing tool to diagnose combined defects: gear-bearing in rotating machinery. International Symposium on Technology & Sustainable Industry Development, ISTSID'2019, Eloued, Algeria, 24 – 26 February 2019. https://www.univ-eloued.dz/index.php/26-c-universite/c-forums/8145-istsid2019

12

Laadjal, K.; Sahraoui, M.; Hammoudi, M. Y.; Cardoso, A. J. M.; Amaral, A. M. R.; Yahia, K.: ''Diagnosis of ElectrolyticCapacitors in Three-Phase InterleavedBoostConvertersControlled by Mixed WeightedSensitivity H-Infinity Design Control''; AnnualConference of the IEEE IndustrialElectronics Society, Lisbon, Portugal, pp. 1678-1683, October, 2019.

13

Mahmoudi, A.; Yahia, K.; Cardoso, A. J. M.; Sahraoui, M.; Mesai Ahmed, H.: ''Modeling of Synchronous Reluctance Generator for an Isolated Wind Turbine System''; International Symposium on Technology&SustainableIndustryDevelopment, El Oued, Algeria, pp. 1-4, February, 2019.

14

Belarbi, Mohamed-Ouejdi; Tati, Abdelouahab; Khechai, Abdelhak, Natural Frequency Analysis of Rectangular Laminated Sandwichs Plates Using 2D Layerwise FE Model, 2.International Symposium on Mechatronics and Renewable Energies El-Oued 10- 11 December 2018 [96]

15

Djahara H., Meftah K., Sedira L. & Ayadi A. A New 20-node High-Order Finite Element based on the SFR Concept for Analyzing 3D Elasticity Problems. The 3rd International Conference on Electromechanical Engineering, ICEE’2018, Skikda, Algeria, 21 – 22 November 2018. http://conferences.univ-skikda.dz/icee2018/

16

Ayadi A., Meftah K., Sedira L. & Djahara H. An eight-node hexahedral 3D finite element for elastoplastic application. The 3rd International Conference on Electromechanical Engineering, ICEE’2018, Skikda, Algeria, 21 – 22 November 2018. http://conferences.univ-skikda.dz/icee2018/

17

Guerbaai S., Touiker M., Omara A. & Meftah K. Numerical study of flow through a confined porous square cylinder. The 3rd International Conference on Electromechanical Engineering, ICEE’2018, Skikda, Algeria, 21 – 22 November 2018. http://conferences.univ-skikda.dz/icee2018/

18

Djaballah S., Meftah K. & Tedjini M. Study and development of an expert system based on neural networks for the diagnosis of bearing defects. Fourth International Conference on Fracture Mechanics, FRACT'4, Chlef, Algeria, 26 – 29 November 2018. http://www.univ-chlef.dz/uc/?mec-events=4th-international-conference-on-fracture-mechanics-fract4

19

Kerbouche, K.;Cardoso, A. J. M.; Yahia, K.; Mellit, A.: ''MathematicalModelling and Simulation of a DirectlyCoupled Water Pumping System, Using a Photovoltaic-Fed Synchronous Reluctance Motor''; International Conference on Electronic Engineering and RenewableEnergy, Saidia, Morocco, pp. 1-7, April, 2018.

20

Djaballah S., Meftah K. & Sedira L. Optimization of Fiber Orientation in Laminated Plates under the Effect of Temperature and Humidity. Arab Conference on Mechanical Engineering, ARCME’17, Biskra, Algeria, 10 – 11 December 2017.

http://arc me-biskra.com

21

Ayadi A. Meftah K., Sedira L. & Bouzahzah M. Analysis of Small Elastoplastic Deformation Problems Using Finite Element Method. Arab Conference on Mechanical Engineering, ARCME’17, Biskra, Algeria, 10 – 11 December 2017. http://arc me-biskra.com

22

Ayadi A. Meftah K., Sedira L. & Bouzahzah M. Prediction of Plasticity Regions in Thick Plates Using Finite Element Method. Congrès Algérien de Mécanique, CAM2017, Constantine, Algérie, 26 – 30 Novembre 2017.

http://www.cam-dz.org/hom e_uc_cam2017.html

23

Bouzahzah M., Sedira L., Meftah K. & Ayadi A. Refined 3D finite element based on generalised parameters for analysis of short fibre composites. Congrès Algérien de Mécanique, CAM2017, Constantine, Algérie, 26 – 30 Novembre 2017.

http://www. cam-dz.org/home_uc_cam2017.html

24

Bouzgou, A. A., Tati, A., & Khechai, A. (2016, August). Analysis of Deflection in Isotropic and Orthotropic Rectangular Plates with Central Opening Under Transverse Static Loading. In Applied Mechanics, Behavior of Materials, and Engineering Systems: Selected contributions to the 5th Algerian Congress of Mechanics, CAM2015, El-Oued, Algeria, October 25–29 (p. 399). Springer.

25

Belarbi, M. O., Tati, A., Ounis, H., & Khechai, A. (2016, August). Finite Element Based on Layerwise Approach for Static and Dynamic Analysis of Multi-layered Sandwich Plates. In Applied Mechanics, Behavior of Materials, and Engineering Systems: Selected contributions to the 5th Algerian Congress of Mechanics, CAM2015, El-Oued, Algeria, October 25–29 (p. 435). Springer.

26

Yahia, K.; Sahraoui, M.; Cardoso, A. J. M.; Ghoggal, A.: ''The Use of a ModifiedProny'sMethod to Detect the Airgap-Eccentricity Occurrence in Induction Motors''; IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics& Drives, Guarda, Portugal, pp. 441-447, September, 2015.

27

Sahraoui, M.; Cardoso, A. J. M.; Yahia, K.; Ghoggal, A.: ''The Use of the ModifiedProny'sMethod for Rotor Speed Estimation in Squirrel Cage Induction Motors''; IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics& Drives, Guarda, Portugal, pp. 455-460, September, 2015.

28

Sedira L., Alouer A., Meftah K. & Hecini M. Simulation numérique de l'approche d’homogénéisation de Mori-Tanka par une formulation intégrale, applications aux composites a renfort aléatoire. 2èmes Journées Euro-Maghrébines sur les Bio-Composites, Biskra, Algérie, 2–4 Mars 2014. http://univ-biskra.dz/index.php/manifes tations-sc/710-2emes-journees-euromaghrebines-sur-les-biocomposites

29

Yahia, K.; Estima, J. O.; Cardoso, A. J. M.: ''ModelingSynchronous Reluctance Motors Including Saturation, IronLosses and MechanicalLosses''; International Symposium on Power Electronics, Electrical Drives, Automation and Motion, Ischia, Italy, pp. 595-600, June, 2014.

30

Meftah K., Ayad R., Sedira L., Hecini M. & Zouari W. Elément solide 3D multicouche basé sur le concept SFR (Space Fiber Rotation). Congrès Algérien de Mécanique, CAM2013, Mascara, Algérie, 25–28 Novembre 2013.

http://cam-dz.org/hom e_cam2013.html

31

Sedira L., Ayad R., Hammadi F., Meftah K. & Hecini M. Nouvel élément fini basé sur le concept discret de Mindlin pour l'analyse non linaire de plaques/coques isotropes. Congrès Algérien de Mécanique, CAM2013, Mascara, Algérie, 25–28 Novembre 2013. http://cam-dz.org/home_cam2013.html