Influence of the combined system FPS isolator with viscous fluid damper on the dynamic response of the isolated bridges

  • Mohamed-Zohaïr Kaab Université d'El-oued, BP 789, Algérie
  • Abdelhafid Ounis Laboratoire LARGHYDE, Université de Biskra, BP 145, Algérie

Abstract

To illustrate the effect of the combined system FPS isolator (Fiction Pendulum System) with viscous fluid damper on the seismic response of the isolated bridges, a comparative study was realised on a bridge in three different situations. In first situation, we consider the bridge without seismic isolation, while in the second and the third situation, the bridge is successively equipped with a system of FPS isolator then with a combined system FPS isolator and viscous fluid damper. The analysis was done using the digital program of dynamic analysis of the structures SAP2000 and this study consists in comparing the responses of the bridge in terms of baseshear, displacement, acceleration and absorbed energy. The results show that the incorporation of a damping device with viscous fluid damper to the isolator allows to dissipate the maximum of energy, to control the deformations which are located at the level of the isolator and to realize a satisfying compromise between the reduction of the seismic forces and the increase of the deformations in the seismic isolation.

Published
2017-06-27
How to Cite
KAAB, Mohamed-Zohaïr; OUNIS, Abdelhafid. Influence of the combined system FPS isolator with viscous fluid damper on the dynamic response of the isolated bridges. Journal of Applied Engineering Science & Technology, [S.l.], v. 3, n. 2, p. 55-62, june 2017. ISSN 2571-9815. Available at: <http://univ-biskra.dz/revues/index.php/jaest/article/view/2226>. Date accessed: 27 dec. 2024.
Section
Section C: Geotechnical and Civil Engineering

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.